Keene RF2IR IR via aerial cable system


The Keene RF2IR product allows IR control signals to be distributed via conventional aerial coax cable. The IR receiver is the same as that used by the common “sky-eye” type systems although it is not limited to satellite receivers and may be used with any IR controllable AV equipment. It allows easy IR control from any remote TV that is connected by aerial cable to the source equipment.

To use simply connect the “eye” receiver in-line with the TV aerial on the remote TV and the RF2IR in-line with the aerial at the source. IR signals picked up by the eye receiver will be relayed along the aerial cable, decoded by the RF2IR and output to an emitter wand to control the source equipment. The output from the RF2IR can also be fed into an IR distribution amplifier such as the IRBKIT or IR Commander to control multiple items inside a cabinet. In this instance the RF2IR can share the same power source, eliminating the need for multiple adaptors. The DC sockets are wired in parallel so either can be used.

Important! The system makes use of a DC voltage on the aerial cable. This voltage will normally be blocked by a conventional RF distribution amplifier so please ensure that there is a clear signal path between the RF2IR and the remote Skylink receiver. If there is a distribution amplifier in this signal path then either a bypass kit [SLBP] (available separately) must be fitted, or the distribution amplifier replaced with a compatible item such as [SL4] or [SL7].

For pricing and ordering information visit the Keene Electronics site keene